Filter
Top Products
-10
5
Insert the lens into the projector.
• As you insert the lens, look inside the
window to make sure that the pin is in-
serted into the hole of the lens mount.
6 Slide the lens fastener catch tab
in the direction of “LOCK” until
it stops.
• Be careful not to rotate the lens fastener
ring too tight, as the lens fastener ring
will be difficult to loosen the next time
the lens is changed.
7 Replace the lens housing cover.
• If the lens housing cover is not secured
to the projector, you will not be able to
turn the power on.
Changing the Lens
Lens
mount
Pin
Lens fastener catch tab