Filter
Top Products
28
Useful Features
Digital Image Magnification and Reduction
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image or display it in its native
resolution.
(To use the “Power” remote control to operate this
function, slide the MOUSE/ADJUSTMENT switch to
the ADJ. position before pressing ENLARGE.)
1 Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2 When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
• Each time ENLARGE is pressed, image magnification
toggles as shown below.
1. When the input resolution is smaller than XGA (VGA,
SVGA)
Dot by dot1 2 4 8
2. When the input resolution is XGA
1 2 4 8
3. When the input resolution is bigger than XGA (SXGA,
UXGA)
Dot by dot1 2 4 8
• If the input signal is changed during digital image
magnification, the image will return to ן1. The input signal
is changed (a) when INPUT SELECT is pressed, (b)
when there is no input signal, or (c) when the input resolution
and refresh rate changes.
Dot by dot mode display
This mode displays images in their native resolution and
not expanded to fit the LCD resolution. See the steps
and the note above to display an image in dot by dot
mode.
Projector
ON
MUTE
TOOLS
R-CLICK ENTER
INPUT
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
IrCOM
FREEZE
AUTO SYNC
KEYSTONE
ENLARGE
MENU
LASER
BLACK
SCREEN
VOL
OFF
R/C
OFF
ON
1
2
MOUSE
ADJ.
Freeze Function
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image of a computer, giving you more time to explain
the image to the audience.
1 Press FREEZE to freeze the image.
2 Press FREEZE again to return to the moving
image.
Projector
TOOLS
R-CLICK ENTER
INPUT
MOUSE
LIGHT
ADJ.
IrCOM
FREEZE
AUTO SYNC
KEYSTONE
ENLARGE
MENU
LASER
BLACK
SCREEN
1, 2
sg
On-screen Display
On-screen Display