Filter
Top Products
30
Useful Features
Fit to Screen Function
This function can be used to expand or compress
images which are not native 4:3 aspect ratio (i.e. 1,280
ן 1,024 resolution).
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options”.
3Press ∂/ƒ to select “Fit To Screen”.
4Press ß/© to select “ ” to display the image in
its native resolution or “ ” to expand the image,
to fill the screen.
5To exit from the GUI, press MENU.
ON
MUTE
TOOLS
R-CLICK ENTER
INPUT
IrCOM
FREEZE
AUTO SYNC
MENU
LASER
BLACK
SCREEN
VOL
OFF
2, 3, 4
1, 5
Projector
(GUI) On-screen Display
MOUSE
ADJ.
(For use with the “Power” remote control, slide the
MOUSE/ADJUSTMENT switch to the ADJ. position.)
1Press MENU.
2Press ß/© to select “Options”. The lamp usage
time will be displayed.
3Press ∂/ƒ to select “Signal” to display the
current input signal.
4To exit from the GUI, press MENU.
• It is recommended that the lamp be replaced after
1,900hours of usage. At this point, take the projector to
your nearest Sharp Authorised LCD Projector Dealer or
Service Centre to have the lamp replaced. See page 36 for
details.
Checking the Input Signal and Lamp Usage Time
This function allows you to check the current input signal
information and accumulated lamp usage time.
ON
MUTE
TOOLS
R-CLICK ENTER
INPUT
IrCOM
FREEZE
AUTO SYNC
MENU
LASER
BLACK
SCREEN
VOL
OFF
2, 3
1, 4
Projector
MOUSE
ADJ.
(GUI) On-screen Display