Filter
Top Products
26
Operation
Computer Image Adjustments (INPUT 2 (RGB) mode only)
Auto Sync Adjustment
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC.
• The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or
the input selection is changed.
1 Press AUTO SYNC on the remote control.
Remote control
On-screen Display During Auto Sync adjustment, “Adjusting The Image”
is displayed as shown on the left.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See page 27.)
RGB/
COMPONENT
INPUT 1
PICT MODE
AUTO SYNCINPUT 2 GAMMA
KEYSTONE
VIDEO FREEZE
S-VIDEO CLR TEMP
1