Filter
Top Products
Rev 9 Aug.11 11
When you use the AirCard USB Modem with the same computer, TRU-Install
verifies that the correct software is already installed. This process may take a few
seconds.
To end a high-speed connection, click
Disconnect.
If you need to re-install the software, see page 10.
Mac
The first time you run Watcher:
1. When your computer detects the modem, the message "New network inter-
faces have been detected" appears.
2. Click the
Network Preferences... button.
3. In the Network window, click
Apply. Your modem connects to the network.
a. If there is no profile defined, a message opens asking if you want to
create a new profile.
b. Click
Create a new profile.
c. In the
Profiles window, click + to create a profile.
To end a high-speed connection, click
Disconnect.
Using the microSD card
Some AirCard USB Modem models can accommodate a microSD external
storage card.
The microSD card appears as a USB memory drive when the AirCard USB
Modem is inserted in your computer. You can copy, paste, and drag files to and
from it the same way as you can with any other external drive.
Scenario Required action
Watcher automatically detects or creates a
default profile.
Click Connect.
Watcher prompts you to create a data profile.
1. Click Yes, then....
• If Watcher opens the Options window Profile
pane and pre-selects an appropriate profile
(normally the name of your service provider)
from the drop-down list...
a. Click OK to accept that profile (or choose
another from the drop-down list).
b. Click Connect.
• If Watcher opens the Options window Profile
pane, the Profile name field is blank, and
your service provider is not included in the
drop-down list...
You need to create a profile manually. Refer to the
Watcher online help for details.
1. Click Help > Help topics or click the
button.