Filter
Top Products
Series 24-HP Instruction Manual Chapter 3 Operation
IM-24-HP 3-3
Using the Setup Menus
Programming the Flow Meter
1. Enter the Setup Menu by pressing the ENTER key until prompted for a password. (All
outputs are disabled while using the Setup Menus.)
2. Use the keys to select the password characters (1234 is the factory-set
password). When the password is correctly displayed, press ENTER to continue.
3. Use the Setup Menus described on the following pages to customize the multi-
parameter features of your Innova-Mass Flow Meter. (The entire lower display line is
available for entering parameters.)
4. To activate a parameter, press ENTER. Use the keys to make selections. Press
ENTER to continue. Press EXIT to save or discard changes and return to Run Mode.
5. Program the UNITS menu first because later menus will be based on the units
selected.