Filter
Top Products
PN 2110036 Revision 1.0 05/11/99 6-1
6. Configuring the MP215 via AT
Commands
6.1. Configuring the MP215 for CSC mode
To configure the MP215 for AMPS operation, the modem must first be in
CS-CDPD mode:
AT+WS181=1 Places the MP215 into CS-CDPD
mode
Programming the NAM
It is possible to program up to two NAM’s on the MP215.
AT+WVESN (optional) Displays the ESN (to confirm you’re
programming the right modem)
AT+WS178=<n> Selects NAM to be programmed
<n>=1 or 2
AT+WPNAM? (optional) Displays current NAM
AT+WPNAM=<number>,<homesysid> Programs the NAM
Programming the CS-CDPD Modem Bank Dial Code
AT+WPCSDC=<number> programs the modem bank dial code
6.2. CDPD Provisioning
To configure the MP215 for CDPD operation, the modem must first be put into
CDPD mode:
AT+WS181=0 Places modem in CDPD mode
Programming the NEI
Note the MP215 will support only 1 NEI
AT+WPEID (optional) Displays modem’s EID (to confirm
you’re programming the right
modem)