Filter
Top Products
6
Windows NT 4.0
1. From the desktop click Start, then Run.
2. Insert the driver CD, type in
D:\NT4\Install_Serial.exe, then click OK. (Change
D: to match your CD-ROM drive letter)
3. Click Next when the Welcome window appears.
4. Choose Install, then click Next.
5. Click Yes, then click Exit.
6. From the desktop click Start, then Run.
7. Type in D:\NT4\Install_Parallel.exe, then click
OK. (Change D: to match your CD-ROM drive
letter)
8. Repeat steps 3-5.
9. Click Yes to restart Windows to complete the
installation.
To Verify Windows NT 4.0 Installation
1. Click Start, Settings, Control Panel, double click
Ports device icon.
2. Two new COM ports will be assigned when
successfully installed.
3. Click Start, Programs, Administrative Tools,
Windows NT Diagnostics. Click Resources tab,
SIIGpar and SIIGser should be displayed.
Windows 2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver for my device
(recommended), and click Next.
3. Select Specify a location, uncheck the other boxes,
and click Next.