Filter
Top Products
8
4. Repeat steps 1-3 three more times.
5. Restart Windows to complete the installation.
To Verify Windows 2000/XP/Server 2003
Installation
1. Right click My Computer, click Manage, then select
Device Manager.
2. Double click Ports (COM & LPT), two CyberSerial
PCI 16Cxxx... and one CyberParallel PCI... should
be displayed.
3. Double click Multifunction adapters, SIIG
CyberPro 2S1P PCI board should be displayed.
Changing COM Port Address
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting.
Windows 95/98/98SE/ME
1. From the Device Manager window double click
Ports (COM & LPT), then double click the
CyberSerial PCI serial port you want to change.
2. Click Settings tab, at the Port Name box click the
down arrow and select a COM address that is not
currently in use.
3. Click OK, then click OK again to close Device
Manager to save the changes. Follow steps 1-3 again
to change the second serial port if needed.
Windows 2000/XP/Server 2003
1. From the Device Manager window double click
Ports (COM & LPT), then double click the
CyberSerial PCI... serial port you want to change.