Filter
Top Products
3
Hardware Installation
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and
handle cards only by their external edges.
1. Connect the USB 3.0 to SATA 6Gb/s Adapter to a USB
port (USB 3.0 recommended) of your system.
2. Connect your SATA hard disk or SATA DVD/CD-
ROM to the SATA connector of the USB 3.0 to SATA
6Gb/s Adapter.
3. Plug the switching power adapter into the power
jack of the USB 3.0 to SATA 6Gb/s Adapter.
4. Plug in the AC adapter to an available AC power
outlet to power on the USB 3.0 to SATA 6Gb/s
Adapter.
Driver Installation
Windows will automatically detect and install the correct
drivers for the USB 3.0 to SATA 6Gb/s Adapter. No
additional driver installation is needed.
Note: In order to get USB 3.0 performance, make
sure your USB 3.0 controllers have the correct drivers
installed.
To Verify Windows Installation
1. Check Device Manger to verify installation.
For Windows 8 / 7: Right click Computer, click
Manage, click Device Manager.
For Windows Vista: Right click Computer, click
Manage, click Continue, click Device Manager.