Filter
Top Products
4
Software Installation
This section provides information on how to install the
FireWire 800 CardBus DV-Kit software.
Windows Driver Installation
Windows 98SE
1. At the Add New Hardware Wizard, click Next.
2. Select Search for the best driver for your device
(Recommended), then click Next.
3. Insert the driver CD, check CD-ROM drive, uncheck
the other boxes, then click Next.
4. Click Next, then Next again.
5. If prompted for the Windows 98SE CD, insert it, then
click OK.
6. Click Finish and restart Windows to complete the
installation.
Windows ME
1. At the Add New Hardware Wizard, insert the driver
CD, select Automatic Search for a better driver,
then click Next.
2. Click Finish.
3. Click Yes to restart Windows and complete the
installation.
Windows 2000
Windows 2000 automatically installs it's built-in 1394a
driver. To get the full speed out of this controller, install
the Firewire 800 driver using the directions below.
1. Right click My Computer, click Manage, then click
Device Manager.