Filter
Top Products
7
Ulead VideoStudio software installation:
The FireWire 800 CardBus DV-Kit includes Ulead
VideoStudio digital video editing software for producing
home videos complete with attractive titles, transitions
and sounds.
1. Insert the Ulead VideoStudio DV software CD. Auto-
run should start automatically. If not, click Start,
Run, type in X:\Autorun.exe, then click OK.
(Replace X: with the drive letter of your CD-ROM)
2. Choose Install Ulead VideoStudio and follow the
on-screen instructions to complete.
Note: For instructions on how to use Ulead
VideoStudio, please refer to VStudio.pdf file
located in the Document\Manual directory on the
Ulead VideoStudio DV editing software CD.
Connecting a DV Camcorder
Before setting up the digital video camcorder, verify the
FireWire 800 CardBus driver has been successfully
installed in your system, then follow the procedures
below.
1. Boot up your system.
2. Connect the 4-pin connector of the provided
FireWire 400 (1394a) DV cable to your camcorder.
3. Connect the 6-pin connector to the FireWire 400
(1394a) port.
4. Power on the camcorder. The camcorder should
now appear in Device Manager.