Filter
Top Products
10
Connecting a DV Camcorder
Before setting up the digital video camcorder, verify the
Microsoft FireWire 400 driver has been successfully
installed in your system, then follow the procedures
below.
1. Connect the 4-pin connector of the provided
FireWire 400 (1394a) DV cable to your camcorder.
2. Connect the 6-pin connector to the FireWire 400
(1394a) port.
3. Power on the camcorder. The camcorder should
appear in Device Manager.
Verify DV Camcorder Setup
1. Right click My Computer, click Manage, then click
Device Manager.
2. Double click Imaging Device(s), and Microsoft DV
Camera and VCR or DV Camcorder should be
displayed.