Filter
Top Products
10
Existing Windows 2008 Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert the
driver CD, select Locate and install driver software
(Recommended), then click Don't search online.
3. Click I don't have the disc. Show me other options.
4. Click Browse my computer for driver software
(Advanced).
5. Type in D:\Vista64, (change D: to match
your CD-ROM drive letter), then click Next.
6. Click Install this driver software anyway, then click
Close.
7. Remove the driver CD and restart Windows to
complete the installation.
To Verify Windows Server 2008 Installation
1. Right click Computer, click Manage, double click
Diagnostics, click Device Manager.
2. Double click Storage controllers, then double click
Initio INIC1620 S-ATA Adapter.
4. A message This device is working properly is displayed,
the driver has been correctly installed.
BIOS Configuration
The SATA II-150 PCI BIOS will appear everytime your
system starts up. If the BIOS doesn't show, please try
your controller in another PCI slot. During this (Post)
process, the BIOS will show up and indicate the devices
attached to it.