Filter
Top Products
8
4. Remove the driver CD and restart Windows to
complete the installation.
To Verify Windows Vista Installation
1. Right click Computer, click Manage, click Continue.
2. Select Device Manager.
3. Double click SCSI and RAID Controllers, then
double click Initio inic1620 S-ATA Adapter.
4. A message This device is working properly is displayed,
the driver has been correctly installed.
Windows Server 2008 (32-bit)
New Windows 2008 Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows?, click
Load Driver.
3. Insert driver CD, then click Browse.
4. Double click CD Drive (D:). (change D: to match
your CD-ROM drive letter).
5. Highlight Vista32 folder, then click OK.
6. Select Initio inic1620 S-ATA Adapter
(D:\Vista32\1620.inf), then click Next.
7. Follow on-screen instructions to complete Windows
Vista installation.
Existing Windows 2008 Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, insert the
driver CD, select Locate and install driver software
(Recommended), then click Don't search online.
3. Click I don't have the disc. Show me other options.