3. Button Labels
The separate labels for each button can be printed on a transparency foil using laser or inkjet printer.
Dimension of the label are
• 6.5 mm x 12 mm for normal button
• 6.5 mm x 29 mm for double button.
It is necessary to disassembly the control panel to change a label.
Steps are
1. Put the control panel on a table face down.
2. Unscrew the screws.
3. Dismount the bottom of the control panel with electronic board.
4. Install new label.
5. Assembly the control panel.
User Manual Small Keyboards
www.cuesystem.com
Page 6 of 18