Silex technology KX-CL 600 Printer User Manual


 
Setup
16
5 Place media with the printing side up under the
hooks in the tray.
NOTES:
When loading thick paper, card stock, coated
paper, transparencies, labels, envelopes or
Japanese postcards, use the multi-purpose tray.
See “Available Media” in the Maintenance and
Specifications section.
Most media has instructions recommending the
side to be printed first.
Do not mix different types or thickness of media in
the media tray at one time; this may cause a media
jam.
Loading media exceeding the upper limit may
cause a media jam or miss feed.
6 Confirm the media guides are adjusted to the media
size, then make sure to fix the length guide unit.
7 Slide the media tray completely into the printer.
CAUTION:
Be sure to hold the media tray with both hands so
that you do not drop it. The media tray weighs
approximately 6.4 kg (14 lbs.) when it is fully
loaded.
8 Pull (1) and raise (2) the paper support so that the
media does not drop from the output tray.
The multi-purpose tray serves as an additional tray (for
detailed information, refer to “Available Media” in the
Maintenance and Specifications section).
1 Open the tray cover (1) and pull it to expand the
multi-purpose tray (2).
2 Separate the media guides to the approximate width
of the media.
3 Insert media with the printing side down into the
multi-purpose tray while adjusting the media guides
to the media width.
Upper limit
Load media with the
printing side up.
Hook
Paper support
1
2
Using the Multi-Purpose Tray
1
2
Media guides
Upper limit
Load media with the
printing side down.
Upper limit
Flap
Load media with the
printing side down.
(For Plain Paper, etc.)
(For Envelope)