Filter
Top Products
- 9 -
Automatic station search
You can also let the appliance search for
radio stations. The radio alarm then searches
the selected frequency range until it has
found a radio station.
1.Press and hold the button UP d for two
seconds: The radio alarm searches for the
station with the next highest frequency.
2.Press and hold the button DOWN g for
two seconds: The radio alarm searches
for the station with the next lowest fre-
quency.
Repeat these steps until you have found a
radio station to your liking.
Programming stations
For each of 2 users you can save 20 VHF sta-
tions and 12 MW stations as favourites in the
appliance. These memory slots are spread
over several pages, which can be called up
via the Page button a. On each page there
are 4 Sender slots, they can be addressed
with the Alarm|Radio Preset buttons 1 - 4 q.
1.Press the Page button a to call up the re-
quired memory page 1 - 5. In the display
j the number of the just selected memory
page appears below "PAGE".
2. Tune in to the desired station.
3.Briey press the button A.M.S. Memory
s. In the display j the number and the
memory slot indicator "MEM" blink.
4. Now press the desired Alarm|Radio Pre-
set button 1 - 4 q at which the radio sta-
tion should be saved. Conrm it with the
A.M.S. Memory button s. The radio sta-
tion is now saved and will be permanently
indicated.
5.As the appliance can be used by several
people, it is equipped with user switching,
A and B. Both users can thus save dier-
ent radio stations as favourites. To switch
over to the individual user, press and hold
the USER|NAP button i for two seconds.
6. Repeat the steps 1 - 4 (for both users)
until all desired radio stations have been
saved.
AMS (Automatic Memory System)
With the AMS function the radio searches au-
tomatically for radio stations and then saves
them to the memory positions..
Press and hold the button A.M.S. Memory
•
s for two seconds. The radio alarm auto-
matically searches for suciently powerful
radio stations and saves them
in the memory.
Accessing the station
1. To recall a saved radio station, in Radio
mode rst select the desired user, A or B.
2.Now select the required memory page
with the Page button a.
3. Press the desired Alarm|Radio Preset but-
ton 1 - 4 q under which the radio station
is saved.
Adjusting the volume.
In radio modus, repeatedly press the but-
•
ton VOL — e to reduce the sound volume.
To the right in the display j the current
sound volume setting is indicated in steps
from V 0 - 18.
Repeatedly press the button Vol. +
• w to
increase the sound volume.
Switch-off Timer
This appliance is tted with a switch-o timer
for up to 90 minutes.
1.Press the button Sleep t to call the func-
tion up and, if need be, to switch the ra-
dio on.
2.Repeatedly press the button Sleep t to
enter in the remaining playing time in steps
of 10 minutes. After a few seconds, the
frequency is indicated once again.
3.In the display j the Sleep indicator ap-
pears
.
4.At any time you can press the Sleep
button t to blend in the remaining
countdown time for a few seconds.
5. On expiry of the time period the ap-
pliance switches itself o.
6.To switch the timer o prematurely,
press the POWER h button.