Filter
Top Products
- 6 -
Abbr. Di. City
ROM 1 Rome /Italy
CAI 2 Cairo /Egypt
IST 2 Istanbul /Turkey
MOW 3 Moscow /Russia
KWI 3 Kuwait City/Kuwait
DXB 4 Dubai /Saudi Arabia
KHI 5 Karachi /Pakistan
DAC 6 Dacca /Bangladesh
BKK 7 Bangkok /Thailand
SIN 8 Singapore
HKG 8 Hong Kong
PEK 8 Beijing /China
TYO 9 Tokyo /Japan
SYD 10 Sydney /Australia
NOU 11 Noumea /
New Caledonia
AKL 12 Auckland /
New Zealand
3. Press the button SNOOZE f to switch
the daylight saving time for the selected
time zone either on or o . The display
indicates “SUM ON” resp. “SUM OFF”
accordingly.
4. If you have activated the summer daylight
saving time, it is automatically switched
o when the appliance receives an RDS-
Signal.
Programme World Time
1.Press the MODE button y once again.
In the display j the indicator for the city
signs blinks below the "WORLD CITY“
display.
2.Press the buttons UP/DOWN g/d to
set the desired world time. Pressing and
holding one of the buttons changes the
indicator faster. Also here, the above list-
ing of programmable cities and their time
dierence is valid.
3. Press the SNOOZE button to switch the
summer daylight saving time either on or
o for the selected time zone. The display
indicates “SUM ON” resp. “SUM OFF”
accordingly.
Programme the reminder function
You can programme in up to 10 dates on
which the appliance can give you a reminder
when they arrive.
1. Press the MODE button y once again. In
the display j a date and the SDA 1 indi-
cator for the memory date 1 blinks.
2. Press the buttons UP/DOWN g/d to
programme in the rst desired memory
date. Pressing and holding one of the but-
tons changes the indicator faster.
3.If you press the SNOOZE button f, the
year number will be deactivated and you
will thus receive a reminder on this date
every year.
4. Should you wish to programme in further
dates, press the Page button a to select a
memory slot from 2-10.
5. Proceed as above with further dates.
6. To deactivate the memory function, pro-
gramme in a date that lies in the past.
Programme the Update function
With this function the appliance can automat-
ically up-date the time by using RDS-Data.
1.Press the MODE button y once again.
The display j indicates "UPDATE ON".
2. Press the button DOWN g to deactivate
the up-date function. The display j then
shows "UPDATE OFF".
3. Press the button UP d to reactivate the
up-date function.
Programme time for the slumber
function
1.
Press the MODE button y once again.
The display j indicates "SNOOZE 09".
2. Press the buttons DOWN/UP g/d to ad-
just the time span for the switch o timer
to between 01 and 59 minutes.
Selecting 12 or 24 hour time display
1.
Press the MODE button y once again.
The display j indicates "24HR“.
2.Press the button DOWN g to select the
12 hour modus. In the display j appears
"12HR".