Silvercrest KH 2450 Microcassette Recorder User Manual


 
60
the voice recorder for dictation recordings. Additionally, in PC operation you
cannot utilise the menu or any of the other adjustments for the voice recorder.
3
Insert the small plug of the supplied USB cable into the USB interface » «
k
on the voice recorder.
4
Insert the large plug of the USB cable into a free USB interface on your PC. In
the display
q
the symbol appears briey; aerwards, the battery symbol
blinks. As soon as the charging process begins, the battery symbol lls
and empties itself continually. Should the charging process be interrupted, for
a few seconds a completely charged battery symbol is shown; subsequently it
indicates again the actual charge condition of the inserted batteries.
5
Ensure that the automatic switch-o of the voice recorder is deactivated.
Check this under the Menu item »Power o« (see chapter . » Switch-o op-
tions«); for charging operations the setting »manual« must be selected. Bear
in mind that the voice recorder in a switched-o condition cannot charge the
batteries in the battery compartment.
6
When the inserted batteries are fully charged, the symbol is indicated in
the display
q
. Remove the USB cable from the USB interface » «
k
on the
voice recorder and the USB interface on the PC.
. Copying dictation recording from the voice recorder to a PC
With the supplied soware »Convert« you can copy saved dictation recordings
from the voice recorder to a PC. ereby, the dictation recordings are converted
into Wave les (data ending.wav), which can be played back with standard com-
mercial media players. e soware can be installed and used on PCs complying
with the following minimum requirements:
Ú
Pentium III Processor,  MHz
Ú
Operating systems …
… Windows® 
… Windows® XP
… Windows® Vista™
Ú
USB . or .
Bedienungsanleitung KH 2450 EN.indd 60 23.12.2008 23:09:47