Filter
Top Products
SIM2 C3X LITE
RS-232C CONTROL SPECIFICATIONS
13
(5)
Table below associates OSD labels with returned values:
Gamma
OSD
Label
Returned
value
ST1
0B
EN1
0D
EN2
0E
EN3
06
EN4
07
EN5
09
GR1
0A
GR2
0C
User
05
(6)
Table below associates OSD labels with returned values:
Memory
OSD
Label
Returned
value
0 (Auto)
00
1
01
2
02
3
03
5. Examples
1. Send the simulated "SWITCH ON FROM STAND-BY" Remote Control keycode.
Remote Control allows Switching on from Stand-by via the key "0".
Send the code relative to key "0":
BEEF0206006BE6520100000000.
The projector switches on and the last source memorised prior to switch off is automatically selected.
The projector returns the response code: 06 (Acknowledged with no error).
2. Send the simulated "MENU RIGHT" Remote Control keycode.
Send the packet:
BEEF02060023E75A0100000000.
The OnScreen Display appers on the screen.
The projector returns the response code: 06 (Acknowledged with no error).
3. Send the "SET ASPECT ANAMORPHIC" Operation Code.
Send the packet:
BEEF0206009DF5840100000000.
The Aspect Ratio changes to Anamorphic.
The projector returns the response code: 06 (Acknowledged with no error).
4. Select "INPUT 3 (COMP RGB) WITH YcrCb 15kHz SIGNAL"
Send the packet:
BEEF0319005B0C01820800000000000008000000000000000000000000000000
Wait for the return code and add an additional delay of 50 ms.
Send the the code relative to the Key to which Input 3 has been assigned: for instance if the key is "3"