Filter
Top Products
MOON PSX 5.3 Power Supply
Rear Panel Connections
Figure 2: MOON LP5.3 Rear panel Figure 3: MOON PSX 5.3 Rear panel
The rear panel of the MOON PSX 5.3 will look similar to Figure 3 (above right). There is a 4-pin female XLR connector,
labeled “DC output”, located on the left side. On the right side are the the power “main switch” and IEC receptacle, labeled
“AC Input”.
To connect the MOON LP 5.3 Phono Preamplifier to the MOON PSX 5.3 Power Supply, follow these steps:
1. Disconnect the AC power cord from your MOON LP 5.3.
2.
Use the supplied DC 4-pin XLR cable to connect the “DC Output” on the MOON PSX 5.3 to the “DC Power”
input on the MOON LP
5.3. The male end (with 4 pins) of the cable connects to the MOON PSX 5.3 and the female
end (with 4 holes) connects to the MOON LP
5.3. Do not use an aftermarket or custom 4-pin XLR cable as the supplied
cable is specifically designed for this application.
3. Connect the MOON LP5.3’s AC power cable to the IEC receptacle, located on the PSX5.3’s rear panel. Alternatively, if
you wish, you may use a dedicated high-performance AC cable designed for for preamplifiers. Ensure that the AC wall
outlet you use has a functioning ground. For the best sonic performance, it is preferable that you plug your PSX
5.3
directly into a dedicated AC outlet and avoid using an extension cord. If you have the time and willingness, consider
installing a superior quality AC wall outlet such as a hospital grade Hubbell.
4. In order to obtain the maximum performance from your audio system, we strongly recommend that the detachable
power cord not come into physical contact with any of the interconnect cables from your audio system. In the event that
this can’t be avoided, you should ensure that any cables coming into contact with each other are crossed at ninety degree
angle to minimize the contact area.
____________________________________________________________________________________
Rear Panel Connections 8