Filter
Top Products
C H A P T E R 3
Usingyour interactivewhiteboardsystem
19 smarttech.com/kb/170401
Setting Use Notes
Group Name Displays the projector’s
workgroup name as set by an
administrator (maximum 12
characters).
You can set the projector’s workgroup name
using the remote management features (see
Remotely managing your system through a
network interface on page 57 and Remotely
managing your system through an RS-232
serial interface on page 67).
Projector Name Displays the projector’s name
as set by an administrator
(maximum 12 characters).
You can set the projector’s name using the
remote management features (see Remotely
managing your system through a network
interface on page 57 and Remotely managing
your system through an RS-232 serial
interface on page 67).
Location Displays the projector’s location
as set by an administrator
(maximum 16 characters).
You can set the projector’s location using the
remote management features (see Remotely
managing your system through a network
interface on page 57 and Remotely managing
your system through an RS-232 serial
interface on page 67).
Contact Displays the contact name or
number for projector support as
set by an administrator
(maximum 16 characters).
You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface on page 57 and Remotely
managing your system through an RS-232
serial interface on page 67).
Language menu
Language Selects language preference. Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to
4000 hours from when it was
last reset.
Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
Resetting the lamp hours on page 40 for
details on the lamp hours reset procedure.
Input Displays the currently displayed
video input source (VGA-1,
VGA-2, HDMI or None).