Filter
Top Products
C H A P T E R 3
Usingyour interactivewhiteboardsystem
20 smarttech.com/kb/170401
Setting Use Notes
Resolution Displays the projector’s most
recently detected video source
signal resolution and refresh
rate.
If there is no current video input source signal,
this setting displays the last known source
signal image resolution and refresh rate.
Firmware
Version
Displays the projector’s digital
display processor (DDP)
firmware version in x.x.x.x
format.
MPU Version Displays the projector
microprocessor unit (MPU)
firmware version in x.x.x.x
format.
Network Version Displays the projector’s
network communications
processor firmware version in
x.x.x.x format.
If you haven’t enabled the Network and VGA
Out setting, this setting is unable to display
the projector’s network communications
processor firmware version and displays
0.0.0.0 instead.
Model Number Displays the projector’s model
number.
Serial Number Displays the projector’s serial
number.
Focusing the image
Use the focus lever located on the projector lens to focus the projected image.
To focus the image
Rotate the focus ring clockwise or counter clockwise until the image is in focus.