Filter
Top Products
Silently Removing Earlier Versions of SMART Board Software 7
Removing SMART Board Software 8.x
SMART used the Install Shield installation utility to install SMART Board software versions 8.x. To
remove these versions of software silently, you must create a setup.iss file.
Before you can perform the following procedures, you must obtain the product code for your
version of SMART Board software. Refer to the following table for the ProductCode value to use
for these versions of software:
NOTE: Include the braces—"{" and "}"—when using a ProductCode in the following commands.
You only need to create the initial setup.iss file once. You can then use this setup.iss file to
remove the same version of SMART Board software from other computers on your network.
1. Check the version of SMART Board software that are installed on your computers. Refer to the
table above to identify the product code you must use in the following commands.
2. Click Start > Run and type CMD into the Open field.
A DOS window opens.
3. Type:
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /MProductCode /l1033 /r /z-AddRemove -RemoveReg
and then click OK.
This command removes the SMART Board software and creates a setup.iss file in the root of
the Windows folder.
4. Place the setup.iss file on a network server where all computers can access it.
Perform the following steps at each computer:
1. Click Start > Run and type CMD into the Open field.
A DOS window opens.
2. Type:
"C:\Program Files\Common Files\InstallShield\Driver\8\Intel
32\IDriver.exe" /MProductCode /l1033 /s /z-AddRemove -RemoveReg /
f1"path to the setup.iss file\setup.iss" /f2"destination path for the
uninstall log file\uninst.log", and then click OK.
SMART Board
Software Version
ProductCode
8.0.0 {7823065C-AA64-425D-A9A3-18BF7B99E944}
8.0.1 {F414173A-7BE1-46C6-811A-51277A4D9E7B}
8.1.0 {155FBC4E-CF09-4698-961B-DF9787E6B8B8}
8.1.1 {7AD771BB-B681-4659-B7FA-223FCB1FDF56}
8.1.2 {55C574CA-8D71-46F1-9897-98DAE55C0394}
8.1.3 {10D2A154-D221-4455-8426-E67D12C092F9}
8.1.4 {41CEFD25-0D33-44EA-A19C-5A1EBABFC041}
To create the silent removal file
To remove SMART Board software 8.x