Filter
Top Products
7. Unplug the DB9 cable from the serial controller and plug it into the gender changer on the X-
Port 20 switch.
Unplug DB9 cable from here
Serial Controller
Plug DB9 cable into gender changer
X-Port 20 Switch
8. Attach the loose end of the DB9 female-female ribbon cable to the serial controller using the
supplied screws. Then tie wrap the ribbon cable and serial cable in place as shown.
Tie
Wraps
Ribbon Cable
Screw (x 2)
X-Port 20 Switch Installation Guide for the 2000i 99-00486-00 Rev B0
4