Filter
Top Products
W
EB
-B
ASED
M
ANAGEMENT
3-8
System Information
Use the System Information screen to display descriptive information
about the switch, or for quick system identification as shown in the
following figure and table.
Parameter Description
System Name* Name assigned to the switch system.
IP Address IP address of the agent you are managing. The agent
supports SNMP over UDP/IP transport protocol. In this
environment, all systems on the Internet, such as network
interconnection devices and any PC accessing the agent (or
running EliteView) must have an IP address. Valid IP
addresses consist of four decimal numbers, 0 to 255,
separated by periods. Anything outside of this format will
not be accepted by the configuration program.
Object ID MIB II object identifier for switch’s network management
subsystem.
Location* Specifies the area or location where the system resides.
Contact* Contact person for the system.
System Up Time Length of time the current management agent has been
running.
*
Maximum string length is 255, but the screen only displays 45 characters. You can
use the arrow keys to browse the whole string.