Filter
Top Products
U
SING
THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-14
Default Gateway Gateway used to pass trap messages from the system’s agent
to the management station. Note that the gateway must be
defined if the management station is located in a different IP
segment. The default value is null.
IP State Specifies whether IP functionality is enabled via manual
configuration, or set by Boot Protocol (BOOTP). Options
include:
USER-CONFIG - IP functionality is enabled based on the
default or user specified IP Configuration. (This is the
default setting.)
BOOTP Get IP - IP is enabled but will not function until a
BOOTP reply has been received. BOOTP requests will be
periodically broadcast by the switch in an effort to learn its
IP address. (BOOTP values can include the IP address,
default gateway, subnet mask, and TFTP server IP.)
Parameter Description