Filter
Top Products
Flash/File Commands
4-65
4
Command Mode
Privileged Exec
Command Usage
• If you enter the command dir without any parameters, the system displays all
files.
• A colon (:) is required after the specified unit number.
• File information is shown below:
Example
The following example shows how to display all file information:
whichboot
This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Specifies the unit number.
Default Setting
None
Command Mode
Privileged Exec
Table 4-25. File Directory Information
Column Heading Description
file name The name of the file.
file type File types: Boot-Rom, Operation Code, and Config file.
startup Shows if this file is used when the system is started.
size The length of the file in bytes.
Console#dir
file name file type startup size (byte)
------------------------------ -------------- ------- ---------
D2.2.1.3 Boot-Rom image Y 169740
V2.2.1.9 Operation Code Y 1635684
Factory_Default_Config.cfg Config File Y 5013
-------------------------------------------------------------------------
Total free space: 5373952
Console#