1. Connection and removal of connector
• Hold the lever and connector body with two fingers and
insert the connector straight into the pin until it is locked with
a click sound.
• To remove the connector, pull it out straight while pressing
the lever with one finger.
1. Mounting with screws
• Tighten two M3 x 16L mounting screws at a tightenin
torque of 0.5 to 0.7 N·m.
• Mounting surface should be flat and even. A bumpy
uneven mounting surface can result in damage to the case
3.
Refer to each applicable actuator's catalogu
for the mounting of sensor unit.
• In the case of mounting to the
DIN rail, SMC recommends the
following end plates: as
detailed in the table on the
right. Consult each manufacturer
for the handling and details of
end plate.
2. Mounting and removal to DIN rail
Mounting
• Hook the claw 1 of the
amplifier body to the upper
part of DIN rail, press down
and push horizontally until
the claw 2 is locked with a
click sound.
Removal
• To remove from the DIN ra
push the amplifier bod
upward and then pull
horizontally to release fro
the claw 1 side.
Wiring Mounting of Amplifier Unit
Caution
• Use mounting screws (M3 x 16L) or DIN rail (35mm width).
• Adjust offset before mounting of the amplifier unit.
Caution
Lever
2. Connection of sensor
connector
• Cut the sensor cable as illustrated to
the right.
• Referring to the table below, insert
each lead wire of the cable at the
position marked with a number
corresponding to the colour of the
lead wire.
• Confirm that the numbers on the connector
match the colours of the wires and that the
wires are inserted to the bottom. Press
part A by hand for temporary fixing.
• Press in the central part of Part A vertically
with a tool such as pliers.
• A sensor connector cannot
be taken apart for reuse
once it is crimped. If the wire
arrangement is incorrect or
if the wire insertion fails, use
a new sensor connector.
• For detailed information about e-con connectors, please
consult the manufacturers of the respective connectors.
1
2
3
4
Part A
12
3
4
20mm or more
Sheath
Insulator
Connector no.
1
2
3
4
Wire core colour
Black
(
SOUT1
)
Blue
(
GND
)
White
(
SOUT2
)
Brown
(
Vsw
)
Manufacturer
Tyco Electronics AMP
Part no.
1473562-4
Manufacturer
OMRON Corporation
IDEC IZUMI Corporation
Part no
PFP-M
BNL6
Washer
M3 x 16L
Claw 2
OUT1
OUT2
TRIMMER
SWITCH
READY
SMC
O
U
T
1
O
U
T
2
T
R
IM
M
E
R
S
W
IT
C
H
R
E
A
D
Y
S
M
C
Claw 1
OUT1
OUT2
TR
IMMER
SWITCH
READY
SMC
O
U
T
1
O
U
T
2
T
R
IM
M
E
R
S
W
I
T
C
H
R
E
A
D
Y
S
M
C
D-RNK
D
-
Y
7
K
Trimmer Auto Switch Precautions 3
Be sure to read before handling
SMC CORPORATION (Europe)
Austria +43 226262280 www.smc.at sales@smc.at
Belgium +32 33551464 www.smcpneumatics.be post@smcpneumatics.be
Bulgaria +359 2 9744492 www.smc.bg sales@smc.at
Czech Republic +42 0541424611 www.smc.cz office@smc.cz
Denmark +45 70252900 www.smc-pneumatik.dk smc@smc-pneumatik.dk
Estonia +372 6593540 www.smcpneumatics.ee smc@smcpneumatics.ee
Finland +358 9859580 www.smc.fi smcfi@smcfi
France +33 164761000 www.smc-france.fr contact@smc-france.fr
Germany +49 61034020 www.smc-pneumatik.de info@smc-pneumatik.de
Greece +30 2103426076 www.smceu.com parianos@hol.gr
Hungary +36 13711343 www.smc-automation.hu office@smc-automation.hu
Ireland +353 14039000 www.smcpneumatics.ie sales@smcpneumatics.ie
Italy +39 0292711 www.smcitalia.it mailbox@smcitalia.it
Latvia +37 7779474 www smclvlv info@smclvlv
Netherlands +31 205318888 www.smcpneumatics.nl info@smcpneumatics.nl
Norway +47 67129020 www.smc-norge.no post@smc-norge.no
Poland +48 225485085 www.smc.pl office@smc.pl
Portugal +351 226108922 www.smces.es postpt@smc.smces.es
Romania +40 213205111 www.smcromania.ro smcromania@smcromania.r
Russia +812 1185445 www.smc-pneumatik.ru smcfa@peterlink.ru
Slovakia +421 244456725 www.smc.sk office@smc.sk
Slovenia +386(7)3885249 www.smc-ind-avtom.si office@smc-ind-avtom.si
Spain +34 945184100 www.smces.es post@smc.smces.es
Sweden +46 86030700 www.smc.nu post@smcpneumatics.se
Switzerland +41 523963131 www.smc.ch info@smc.ch
Turkey +90 2122211516 www.entek.com.tr smc-entek@entek.com.tr
UK +44 8001382930 www.smcpneumatics.co.uk sales@smcpneumatics.co.u