Filter
Top Products
Wiring of cable for solenoid valve power supply and communication
Communication connector for DeviceNet
Terminal Wire color Connected to
V- Black (-) side of power supply cable
CANL Blue Low side of communication cable
FG - Ground / Shield
CANH White High side of communication cable
V+ Red (+) side of power supply cable
Power supply connector for solenoid valve
Terminal Wire color Connected to
24V - (+) side of solenoid valve source supply
0V - (-) side of Solenoid valve source supply
CAUTION
• Before wiring, be sure to turn power supply off.
• Screw for connectors is M3. Tighten them properly by torque of 0.5 to 0.6 [N·m].
• SI unit isn’t available for monitoring of power supply for solenoid valve.
• Do not put cable specified by DeviceNet with/near high voltage line or strong
electric line such as driving line.
- 7 -
SMC CORPORATION
Doc.No.EX
##-OME0015