![](http://pdfasset.owneriq.net/b/dd/bddbf6bc-e8ff-4ff5-bdbb-e6b54729de6c/bddbf6bc-e8ff-4ff5-bdbb-e6b54729de6c-bg68.png)
A
DVANCED
S
ETUP
4-61
Reset
Click “APPLY” to reset the Barricade. The reset will be complete when the
power LED stops blinking.
If you perform a reset from this page, the configurations will not be
changed back to the factory default settings.
Note: If you use the Reset button on the front panel, the Barricade
performs a power reset. If the button is depressed for over five
seconds, all the LEDs will illuminate and the factory settings will
be restored.