Filter
Top Products
5. Select your time zone from the list. If you want to
automatically synchronize the ADSL router with a public
timeserver, check the box [Enable Automatic Time Server
Maintenance]. Select the desired server from the drop
down menu.
6. Click [NEXT] to continue and go to the ADSL parameter
settings page.
42
41
7. Select your Country and Internet Service provider. This will
automatically configure the SMC7804WBRB with the correct
Protocol, Encapsulation and VPI/VCI settings for your ISP.
If your Country or Internet Service Provider is not listed you will
need to manually configure ISP settings. Skip to the section
Country or ISP not listed.
8. Enter your ISP username, password and DNS Server address.
If your ISP uses Protocol RFC1483 Routed or Bridged no
username/password is required. For RFC1483 Routed you will need
to enter the IP address, Subnet Mask, Default Gateway and DNS
Server address supplied by your ISP.
Note: By default 192.168.2.1 is set for DNS Server address, this
need to be changed to reflect your ISP DNS Server address.
English
English