Filter
Top Products
PWR On The Barricade
TM
is receiving
power. Normal operation.
Off Power off or failure.
ADSL Sync On ADSL connection is syncronized.
Flashing The Barricade is establishing an
DSL link.
Off ADSL connection is not established.
ADSL Data Flashing The indicated ADSL port is sending
or receiving data.
WLAN Off No data is being transferred.
Flashing The WLAN port is sending or
receiving data.
Ethernet On Ethernet connection is established.
(4LEDs)
Flashing The indicated LAN port is sending
or receiving data.
Off There is no LAN connection on
the port.
6
English
The front panel of the SMC7804WBRB includes LED indicators
for easy monitoring.
The following table defines the function of each LED.
Connecting Devices
1. Connect computers directly to the SMC7804WBRB on ports 1-4
on the rear panel. If you have more than 4 computers to plug
in, connect a hub or a switch and connect additional computers
to that device. To connect wirelessly refer to the User Guide for
your wireless adapter.
2. Connect supplied RJ-11 cable from ADSL Micro filter/Splitter
to the ADSL WAN port on the SMC7804WBRB.
3. Plug the power cord into the power jack.
Hardware
LAN Ports
Reset Button
WAN Port
Power inlet
English
5
LED Status Description