Filter
Top Products
S
YSTEM
4-63
Password Settings
Use this page to restrict access based on a password. For security you
should assign one before exposing the Barricade to the Internet.
Passwords can contain from 3 to12 alphanumeric characters and are case
sensitive.
Note: If your password is lost, or you cannot gain access to the user
interface, press the Reset button (colored blue) on the rear panel
(holding it down for at least six seconds) to restore the factory
defaults. The default password is “smcadmin”.
Enter a maximum Idle Time Out (in minutes) to define a maximum period
of time an inactive login session will be maintained. If the connection is
inactive for longer than the maximum idle time, it will be logged out, and
you will have to log in to the web management system again. Setting the
idle time to 0, will mean the connection never times out.
(Default: 10 minutes)