Filter
Top Products
C
ONFIGURING THE
B
ARRICADE
4-64
Remote Management
By default, management access is only available to users on your local
network. However, you can also manage the Barricade from a remote host
by entering the IP address of a remote computer on this screen. Check the
Enabled check box, and enter the IP address of the remote host and click
Save Settings.
Note: If you check Enabled and specify an IP address of 0.0.0.0, any
host can manage the Barricade.
For remote management via WAN IP address you need to connect using
port 8080. Simply enter WAN IP address followed by :8080 in the address
field of your web browser, for example, 212.120.68.20:8080.