Filter
Top Products
6
EZ CONNECT WIRELESS ACCESS POINT
SMCPWR-INJ*
POWER INJECTOR
The PoE Power Injector allows the SMC2655W
Access Point to receive power from the Ethernet
cable.
The Power Injector can be used with an Access
Point that has limited access to a standard electric
outlet.
Follow these steps to install the Power Injector:
1. Connect the power adapter cable from the
power supply to the Power Injector.
2. Plug the power cord into a power outlet. The
Power Injectors LED will light up.
3. Connect an Ethernet cable from your HUB/
Switch to the network port (labeled Network)
of the Power Injector.
4. Connect another Ethernet cable from the
Access Point port of the Power Injector
(labeled Access Point) to your Access Point.
* Sold separately
** SMCPWR-INJ is designed for use with
SMC2655W Access Point only. Using the Power
Injector with any other Ethernet device may cause
damage to the device.