Filter
Top Products
The EZ Connect TURBO Cards are IEEE 802.11b - compliant 11/22
Mbps auto-sensing wireless network adapters. They meet the needs of
small business and corporate users who require backwards
compatibility with a 11 Mbps wireless connection to an existing LAN.
In addition, they provide exceptional scalability to 22 Mbps through
the use of Packet Binary Convolutional Code (PBCC) technology.
These new adapters feature an operating range of up to 1,155 feet
and true plug-and play installation in all notebook computers.
System Requirements
• SMC2435W: Available Cardbus PCMCIA Type II slot
• SMC2402W: Available PCI Bus-Master slot
• Windows 98/Me/2000/XP
• Minimum of 1 MB available hard disk space for utility and driver
installation
• Another IEEE 802.11b compliant device installed in your network,
such as the SMC2404WBR Barricade Turbo Wireless Cable/DSL
Broadband Router, or another PC with a wireless adapter, such as
the SMC2662W EZ Connect Wireless USB Adapter.
Equipment Checklist
After unpacking the EZ Connect TURBO 11/22 Mbps Auto-Sensing
Wireless Adapter, check the contents of the box to be sure you have
received the following components:
• 1 Wireless Cardbus Adapter (SMC2435W) or 1 Wireless PCI Card
(SMC2402W)
• 1 Driver, Utility, & Documentation CD
•Manual
Immediately inform your dealer in the event of any incorrect,
missing or damaged parts. If possible, please retain the carton
and original packing materials in case there is a need to return
the product. The EZ Connect TURBO Wireless Adapters are
covered by a limited lifetime warranty.
SMC2435W: Installation Instructions
Warning:
• Network cards are sensitive to static electricity. To protect the
card, avoid touching its electrical components and always touch
the metal chassis of your computer before handling the card
1) Turn on your computer and insert the Driver, Utility, and
Documentation CD. Run the utility software and then reboot when
requested.
2) Find an available Cardbus slot in your computer.
3)With the SMC2435W Wireless Cardbus Adapters 68-pin
connector facing the Cardbus slot, and the “EZ Connect
TURBO”label facing up, slide the card completely into the
Cardbus slot as shown below:
4) For Windows 98/Me/2000, Cardbus specification is required. Please
check the documents for your Cardbus adapter driver before
installing the software driver for the EZ Connect TURBO Wireless
Cardbus Adapter.
English
English
1 2