Filter
Top Products
Wireless Card Manager
25
Advance
RTS Threshold – Set the RTS (Request to Send) frame length. If
the packet size is smaller than the preset RTS threshold size, the
RTS/CTS mechanism will NOT be enabled. (Default: disabled)
Fragmentation Threshold – The Fragmentation Threshold can
be set between 256 and 2,346. If the packet size is smaller than
the preset Fragment size, the packet will not be segmented.
(Default: disabled)
Site Scan Type – Use this option for automatically scanning valid
access points on the network. (Default: Active)
Preamble type – The access points and client card drivers have
a radio setting for RF Preamble. Enabling it can boost your
throughput. If you are not sure whether all the clients and access
point radios in your wireless network support the Short RF
preamble, then leave this setting to the default (Long).
QoS (Quality of Service) – Use QoS to specify a guaranteed
throughput level. (Default: disable)
Tx Power – Move the slider up and down to increase or decrease
the transmission power.