Filter
Top Products
SNMP C
OMMANDS
3-65
snmp-server community
Use this command to define the community access string for the
Simple Network Management Protocol. Use the no form to
remove the specified community string.
Syntax
snmp-server community string [ro|rw]
no snmp-server community string
• string - Community string that acts like a password and
permits access to the SNMP protocol. (Maximum length: 32
characters, case sensitive; Maximum number of strings: 5)
• ro - Specifies read-only access. Authorized management
stations are only able to retrieve MIB objects.
• rw - Specifies read/write access. Authorized management
stations are able to both retrieve and modify MIB objects.
Default Setting
• public - Read-only access. Authorized management stations are
only able to retrieve MIB objects.
• private - Read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Command Mode
Global Configuration
Command Usage
The first snmp-server community command you enter enables
SNMP (SNMP v1 and v2c). The no snmp-server community
command disables all versions of SNMP.
Example
Console(config)#snmp-server community alpha rw
Console(config)#
b_mgmt.book Page 65 Tuesday, July 8, 2003 5:24 PM