Filter
Top Products
SMCWHSG14-G
150
3-2-23 SNMP
The SNMP Agent Configuration screen enables you to access to your device via Simple Network
Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or
consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration
screen.
Figure 3-154 SNMP Setting Screen
Item Default Description
SNMP Disable Disables or enables the SNMP management.
SNMP Port 161 If the SNMP enables, also allowed to specific the SNMP port
number via NAT. The allowed SNMP port numbers are 161
(default), 16100-16199 and Trap port numbers are 162 (default),
16200-16299. This Port setting is useful for remote control via
NAT network.
Trap Port 162
Configuration
Community Name public/private Every unit with SNMP enable must be configured to recognize
one or more community names up to 20 characters. The default
setting for the community of entry 1 is “public” and for the entry 2
is “private” and others are empty.
NMS Address ANY The address of the NMS. The default settings for the NMS
Networking are “ANY”.