Filter
Top Products
File Copy Procedure
1. After entering File mode and starting operations, the
LCD will show the following:
2. A few seconds later, the LCD will show the completed
percentage of the process:
Copy is being
p
rocessed…
I: 1% is completed.
IIIII 1/N
XXX %
N: number of HDD partitions, ranging from 1~N.
XXX%: Percentage completed, ranging from 0~100.
3. The LCD will show the following after completing File
Copy:
The LCD will blink and the HDD Access LED on the
front panel will turn green.
Copy is done !!
4. To continue operations, please turn off the power and
start PC again.
5-2 Sector Copy
Supports UNIX, LINUX, Free BSD, NetWare, and Mixed.
For Sector Copy, use source disk and target disk of the
same brand name and model.
Shouldn’t you have two identical disks, please use disks
with the same number of disk heads. (EX:an ordinary
HDD has 16 disk heads)
On same specifications disks, copy by means of
SOHO RAID 24