Filter
Top Products
8. Normal HDD mode for SR2000 is Ultra DMA. In the
event of failure to work with EIDE connector, HDD will
automatically configure itself in PIO mode 4 or with lower
speed.
9. There is a 6mm Ball Bearing Fan integrated in the SR2000
to prevent overheating for 7200 rpm HDD. When two
7200rpm Hard Disks are installed in a very busy server,
we suggest adopting a PC case with optimal design for
overheating prevention in order to avoid PC or RAID
crashes.
10. In case of power failure during the Auto-Rebuild
Function, controller will remember the rebuilding
progress percentage and carry on the operations when the
power is restored.
11.
In case of power failure during Back up, restart Back up
when power is restored.
12.
Under normal conditions, set Operation Mode Switch to
NORMAL position, or else your PC will not detect the
SR2000 and it will have to be reset.
SOHO RAID 5