Filter
Top Products
Push to talk
Copyright
©
2005 Nokia. All rights reserved. 47
To open the browser and to connect
to the PTT network portal provided
by the service provider, select Web.
■ Connect to and
disconnect PTT
To connect to the PTT service, select
Menu > Push to talk > Switch PTT
on. indicates the PTT connection.
indicates that the service is
temporarily unavailable. The phone
automatically tries to reconnect to
the service until you disconnect from
the PTT service. If you have added
groups to the phone, you are
automatically joined to the active
(Default or Listened) groups, and the
name of the default group is
displayed in the standby mode.
To disconnect from the PTT service,
select Switch PTT off.
■ Make and receive a PTT
call
Set the phone to use the loudspeaker
or earpiece for PTT communication.
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may be
extremely loud.
When connected to the PTT service,
you can make or receive dial out
calls, group calls or one-to-one calls.
One-to-one calls are calls you make
to only one person.
Make a dial-out PTT call
For a dial-out PTT call you can select
multiple PTT contacts from the
contact list. The recipients get an
incoming call and need to accept the
call in order to participate. A
dial-out call creates a temporary
group, and the participants join this
group only for the duration of the
call. After the call the temporary dial
out group is deleted.
Select Menu > Push to talk >
Contacts list, and mark the desired
contacts for the dial-out call.
The icon behind the contact in the
list denotes current login status: ,
, or indicate that the person is
either available, unavailable, or
unknown; indicates that the
login status is not available. The
login status is only available for
subscribed contacts. To change the
subscribed contacts, select Options
and from the available contact list
options, Subscribe contact or
Unsubscr. contact, or if one or more
contacts are already marked
Subscribe marked or Unsubscr.
marked.