SonicWALL 01-SSC-9310 Computer Drive User Manual


  Open as PDF
of 4
 
User’s Guide
The DEGRADED drive status indicates that the RAID controller senses that data is missing from the drive.
The Array Status will change to REBUILDING within a few minutes.
8. You may continue to use your SonicWALL CDP appliance while the RAID controller rebuilds the array with
the new drive. The rebuilding process requires at least three hours.
When finished rebuilding, the status for both the drive and the array changes to OK.
9. Re-install the front bezel, being sure to properly line up the LCD connectors. The best practice is to align
and seat the right side of the bezel (as you are facing the front of the SonicWALL CDP appliance), then
view the connectors from above as you carefully press the left side of the bezel into place.
10. Lock the bezel with the front bezel security key.
______________________
Last updated: 4/1/2009
Prepared by: sweigand
3
SonicWALL CDP 6080/5040 Drive Replacement User’s Guide
 previous