Filter
Top Products
4
SonicWALL Scrutinizer 9.0.1 Release Notes
P/N 232-000861-00 Rev A
• Enhanced Cisco Reporting in support of recently introduced Cisco technologies:
Smart Logging and Telemetry (SLT) is a single mechanism of logging and telemetry of traffic that is associated
to a specific event on a switch (for example, an event triggered by an ACL-permitted or ACL-denied packet).
SLT is a threat detection technology and is intended to be used as follows. An admin will configure one or more
Access Control Lists (ACL) on the switch. If an end system violates an ACL, some of the packets will be
captured and sent off in a NetFlow datagram with the name of the ACL that was violated. Scrutinizer version 9
can collect and report on these NetFlow messages.
Cisco TrustSec (CTS) is an umbrella term for security improvements to Cisco network devices based on the
capability to strongly identify users, hosts and network devices within a network. Each CTS Group is a secure
network establishing a domain of trusted network devices. Every device in the Security Group Access (SGA)
domain is authenticated by its peer device. Communication on the links between devices in the SGA domain is
secured with a combination of encryption, message integrity checks, and data-path replay protection
mechanisms. NetFlow reporting allows administrators to monitor the traffic from, and between, the different
CTS groups.
Performance Routing (PfR) complements traditional routing technologies by using the intelligence of a Cisco
IOS infrastructure to improve application performance and availability. PfR enhances routing in order to select
the best path based on user defined policy. The PfR policy can minimize cost efficiently by distributing traffic
load and/or selecting the optimum performing path for applications. PfR NetFlow reports provide details on
active and passive traffic. Active traffic is where the router makes routines connections and exports the
performance results, e.g. out of policy, in NetFlow. Passive traffic can also be monitored and measured for
performance and metrics are exported in NetFlow.
MediaNet Performance Monitoring reports on top interfaces with the most jitter/latency.
All these features require the Cisco Advanced Reporting Module.
New Host Destination Report