Sony BVS-V3232 Network Router User Manual


 
6-3
ROUTING SWITCHER SYSTEM (E)
Lit in Green:
Blinking in Green:
Blinking in Red:
Other errors
S-BUS deta link has
disconnected
Increase in the switcher's
internal temperature/Fan
has stopped
Faulty sync signal detection
Faulty crosspoint hardware
Increase in the switcher's internal
temperature/Fan has stopped
S-BUS deta link has been disconnected
Communication trouble of the
primary statiom
Communication error with a
secondary station
ROM/RAM/EEPROM check error
Re-start display
Display of the input/output board
insertion
Lit in Red:
Start-up of backup power supply
Start-up of backup CPU board
00
6 *
4 *
7 *
2 *
8 *
1 *
3 *
5 *
Status Indicator
Control Terminal Display
Error No. Indicator
FF
Operating normally
Faulty sync signal detection
Faulty crosspoint hardware
Increase in the switcher's
internal temperature/Fan has
stopped
Communication error of the
REMOTE 1 connector (BNC)
/S-BUS
ROM/RAM/EEPROM check
error or table deta reading error
Communication error of the
REMOTE 2 connector (9-pin)
/RS-422A
Communication error of the
REMOTE 3 connector (25-pin)
/RS-232C
Incorrect setting data of the
backup memory
Malfunction of CPU board
Operating Normally
Faulty sync signal detection
Faulty crosspoint
hardware
Start-up of backup unit
*1 *1
6-3. How the Self-Diagnosis Items are Related
6-3. How the Self-Diagnosis Items are Related
*1 : HDS-V3232 does not have run diagnostics check on Status indicator and Error No. indicator.