Filter
Top Products
3-4
ROUTING SWITCHER SYSTEM (E)
SONY ROUTING SYSTEM SETUP MENU DVS-V6464B V2.10 STATION NUMBER 1
MODIFICATION COMMAND
A: DISPLAY CONTROL AREA B: SET SOURCE/DEST TYPE
C: SET DESTINATION NAME D: SET SOURCE NAME
E: SET LEVEL TABLE F: SET ACTIVE UNIT NUMBER
G: UPDATE BACKUP CONTROLLER H: SET GLOBAL PHANTOM
J: NAME STYLE(Type + Num) K: RESET TO DEFAULT TABLE
L: SET PHYSICAL ASSIGNMENT M: SET INHIBIT TABLE
N: SET DESCRIPTION NAME GROUP O: SET TIE LINES
P: CHANGE PASSWORD Q: CHANGE CROSSPOINT
R: CALL SECONDARY STATION
MAINTENANCE COMMAND
S: SELECT INDICATION COLOR(OFF) T: SET CLOCK
U: SELECT CONTROL MODE V: SELECT WARNING DISPLAY (ON)
W: SYSTEM STATUS LOG X: DISPLAY S-BUS COMMUNICATION
Y: DISPLAY TABLE DATA Z: SET UNIT DETECTABLE
Ctrl-X:QUIT SETUP MENU
Model
Software version
Station address
Menu item
Short-cut key
3-4. Menu Screen
3-4. Menu Screen
3-4-1. Menu screen of the primary station
The menu screen shows all menu items for system setting in the table data of the primary station.
By selecting the items on the menu screen using the following procedure, the screen will show the setting
screen.
n
Compared with the system status screen, router system operations take more time, when the menu screen
or the setting screen is open. Therefore, please return to the system status screen after system setting.
The following are two methods of selecting the menu items.
1. Use the cursor keys to select the desired menu item, and press [Enter]. (Some models have no this
function. In this case, perform step 2. to select.)
2. Press the alphabet key assigned to each menu item.
The screen will return to the system status screen when [Ctrl] _ [X] pressed.
Primary station menu screen of DVS-V3232B/V6464B, BKPF-R70 or HDS-V3232 is as follows.
Menu Screen of the Primary Station (Ex. DVS-V6464B)
n
. Menu screen of BKDF-R70 does not have the menu item [S].
. Menu screen of HDS-V3232 does not have the menu item [S] and [Y].