Filter
Top Products
Preparing Graphics Material
Convert the supplied bmp file corresponding to "Graphic_Sample_1" into the
NSP format by yourself using the following procedure.
Notes on Using Microsoft PowerPoint Slides
• Microsoft PowerPoint of Office 2000 exports full color JPEG files and
256-color bmp files. To use full color graphics files, you must convert the
JPEG files into bmp files using a graphics converter.
• The following table shows the maximum size (W x H) of the graphics
materials managed by the system.
The maximum size varies depending on the video signal and the display
size used, either under-scan (full) or over-scan (88%). Check this table
when defining the page size in PowerPoint.
Signal Display Size Size (pixels) Size (inches)
Under-scan (Full) 720 x 480 10.00 x 6.67 NTSC
Over-scan (88%) 630 x 420 8.76 x 5.84
Under-scan (Full) 720 x 576 10.00 x 8.00 PAL
Over-scan (88%) 630 x 504 8.76 x 7.00
2 Click [Convert Material].
4 Select the “Graphic_Sample_1.bmp”
sample file on the upper list, then click
[Start].
Alternatively, move the file to the lower
list using a drag & drop operation.
3 Click [Browse] and specify the “BMP”
folder in the folder where the software
has been installed.
1 Select the Graphics tab of the Material Management window.
If this window is not open, click [Material Management] on the
main menu.
Files to be converted that are
stored in the selected folder
appear on the upper list.
Converted files (material) appear
on the lower list on a blue
background.
Prepared material is listed here.
6