Filter
Top Products
14
Resetting the adjustments
This monitor has the following three reset methods. Use the 0
(reset) button to reset the adjustments.
Resetting a single adjustment item
Use the
, m/M buttons to select the adjustment item you want
to reset, and press the 0 (reset) button.
Resetting all of the adjustment data for the
current input signal
Press the 0 (reset) button when no menu is displayed on the
screen.
Note that the following items are not reset by this method:
• on-screen menu language (page 7)
• adjustment mode in the COLOR menu (EASY, EXPERT,
sRGB) (page 12)
• on-screen menu position (page 13)
• control lock (page 13)
Resetting all of the adjustment data for all input
signals
Press and hold the 0 (reset) button for more than two seconds.
Note
The
0
(reset) button does not function when
(CONTROL
LOCK) is set to ON.
Technical Features
Power saving function
This monitor meets the power-saving guidelines set by VESA,
E
NERGY
S
TAR, and NUTEK. If the monitor is connected to a
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption in three stages as shown below
.
* “Sleep” and “deep sleep” are power saving modes defined by the
Environmental Protection Agency.
** When your computer enters a power saving mode, the input signal is
cut and NO INPUT SIGNAL appears on the screen. After a few
seconds, the monitor enters power saving mode.
Power mode Power consumption
1
(power)
indicator
normal
operation
≤ 145 W green
1 standby ≤ 15 W green and orange
alternate
2 suspend
(sleep)*
≤ 15 W green and orange
alternate
3 active off**
(deep sleep)*
Approx. 1 W orange
power off 0 W off